M&P Farm Equipment

  • 6656 County Rd No 29
  • Almonte, ON K0A 1A0
  • Call Us: (613) 253-4957
  • https://www.mpfarmequipment.com/
Print This Page

2025 Bush Hog® Flex-Wing Rotary Cutters 1812

Information

2025 Bush Hog® Flex-Wing Rotary Cutters 1812

The 1812 Flex-Wing Rotary Cutter is designed for small tractors with a PTO horsepower of 50 to 75. The narrow cutting width of 12-feet makes this Flex-Wing ideal for rolling terrain where a wide rigid cutter will not perform as well. Grass, weeds, and brush up to 1 1/2-inch diameter are no match for the hardened parallel uplift blades. The narrow width is also ideal for orchards with prunings that must be cut into smaller pieces. The 1812 has maintenance friendly features, E-Z cleaning decks, high performance cutting and distribution, and it is built Bush Hog® tough for years of reliable service.

Features may include:

PERFORMANCE
  • E-Z clean smooth decks are on the center and wings.
  • Wing “free float” without movement of wing hydraulic cylinder rod extends cylinder life.
  • Gearbox oil sight gauge allows the checking of the oil level in a few seconds.
  • PTO driveline holder is standard.
  • Wheel spindles are in halves for economy and ease of maintenance.
CONSTRUCTION
  • Center section cushions are at each axle arm to absorb shocks near the wheels.
  • Replaceable full length sideband skids give maximum protection and strength to the sideband.
  • Wheel hub cap retainers are standard to prevent loss of cap and hub grease.
SAFETY
  • Safety lights for highway travel are standard.
  • Full Length Sideband Skids
  • Patented oil sight gauge in all three cutting gearboxes for quick and easy monitoring of oil levels.

Photos

Highlights

  • Almonte, Ontario
  • 2025
  • Bush Hog®
  • Flex-Wing Rotary Cutters 1812
  • Available
  • Cutting: 2" – 13"

Specifications

  • 2025
  • Bush Hog®
  • Flex-Wing Rotary Cutters
  • 1812
  • Rotary Cutters
  • Minimum Tractor: 50 hp
  • Input: Category 4 / Cutting: Category 3
  • Transfer: 160 hp / Cutting: 65 hp
  • Axle: Rubber Pads (Center)
  • Blade tip: 14,504 FPM
  • Center & Wing: 1 Hose Standard
  • Cast Swivel Clevis
  • Cutting capacity: 1 1/2" | Center deck: 10 ga | Wing decks: 10 ga | Wing Cutting Angles: 22° Down and 45° Up | Sidebands: 1/4" X 11 1/2" | Blades: 1/2" X 3" | Blade holder: 11 ga Oval
  • 12'
  • Cutting: 2" – 13"
  • 6′ 8"
  • 5′ 8"
  • 13′ 7"
  • Approximate: 3,200 lbs | Approximate Tongue: 1,100 lbs
  • Wing Level: Turnbuckles
  • 10-year gearbox limited warranty / 1-year machine limited warranty