The Proliner can wrap six layers of plastic around a bale with a diameter of 1.2 metres in approximately 35 seconds from loading to offloading.
The ELHO Proliner 1500 is a robust 3-point mounted round bale wrapper.
The wrap cycle is fully automatic from load to unload.
The ELHO Opus control system enables high-speed wrapping – up to 60 bales per hour, depending on the availability of bales. The machine is equipped with two 750 mm plastic pre-stretchers with film break sensors. If one roll of plastic runs out or the film breaks, the automatic film brake sensors compensate by supplying the required amount from the other pre-stretcher. The Proliner has the ELHO Opus monitor and control system.
The robust load arm is designed to centre the bale to the middle of the wrapping table. The wrapping table has three rollers whose synchronised rolling ensures smooth rotation of the bales. The bale is supported sideways by four support rollers.
The Proliner’s hydraulic system has a valve block that can utilise the LS hydraulic system.
The bale turning ramp, available as additional equipment, makes it easier to collect the bales.
Features may include: