M&P Farm Equipment

Information

2025 Kuhn Multi-Master Series 183 7

KUHN Multi-Master plows are designed to provide operators with the ultimate versatility. With a wide variety of options, easy adjustability from the cab and high quality features that last a lifetime, these plows will be sure to adapt to a wide variety of terrains.

The Multi-Master 153 and 183 plows have been designed to meet the requirements of many operations to provide a machine that is easy to use and strong enough to meet the demands of today’s mid-size to large operations to achieve maximum productivity. This plow range is available from 3 to 7 bottoms in either traction-bolt or non-stop hydraulic. The strength, simplicity and different options available make these plows fully adaptable to your conditions.

Features may include:

Multiple Moldboard Options

• H4 Moldboard: The H4, helicoidal, Scandinavian-type moldboard provides well-formed plowing to a normal depth range of 7-12”. The share is fitted with a reversible/replaceable point that greatly increases the life of the share. Recommended for fall plowing, the H4 moldboard is especially suited for heavy and damp clays. Furrow passes are well defined and trash burial is excellent.

• N Moldboard: The helico-cylindrical N moldboard plows to a depth of 14”. Designed to be highly versatile, it is cylindrical at front, helicoidal at rear. A low draft ensures a partly broken furrow with excellent trash burial. Recommended for spring plowing, this moldboard is versatile and works well in sandy or clay soils.

• VP Slatted Moldboard: The VP slatted moldboard composed of independent and interchangeable slats. Reduces pulling power, due to a lower moldboard surface area. Designed for use in extremely sticky muck and clay soils. Not for use in sand or loam soils or in soils with rocks or stones. The multiple slats allow individual replacement from wear.

• Olympic®: Reversible for maximum efficiency. More pronounced shape at wearing zones on the point for longer life and better protection of the landside. Point is self-sharpening for good ground penetration at all times.

• Marathon®: Reversible for maximum efficiency and features a step resulting in better landside protection.

• Super Marathon®: Fitted with a tungsten carbide tip. High wear resistance with four to five times the life of a traditional share point. A sharp working edge is maintained for excellent ground penetration. Excellent for highly abrasive soils without rocks or stones.

• Traction Bolt. A clean break of the traction bolt, following a force of 5,280 – 8,820 pounds at the plow point, avoids the risk of nuisance shearing.

• The bolt runs with the line of force and is pulled apart – unlike shear bolts which are cut

• Once the bolt breaks, it simply falls away for quick and easy replacement

• After years of use the plow bottoms remain perfectly inline

• Non-Stop Hydraulic (NSH) Reset. When a field obstacle is met, a rapid breakaway of the plow leg occurs. Once the obstacle is passes there is an increase in pressure, bringing the bottom quickly and firmly back into working position. The system also acts as a shock absorber in rocky ground, increasing plow life.

• Heavy-Duty Plow Leg Articulation and Tie Rod. All force is transmitted in a straight line through a one-piece forged and heat treated tie rod.