2025 Kuhn SW 14 Series 1114 C

2025 Kuhn SW 14 Series 1114 C

The KUHN SW 14 Series bale wrappers can wrap large square bales or round bales for maximum versatility. Mounted or trailed models are available, and can be manually or computer- controlled, to best meet your operation’s needs.

KUHN SW 14 Series bale wrappers can wrap large square bales, 2x3 or 3x3 (80x60-90 cm), up to 6’ (180 cm) in length, and round bales up to 5’ (150 cm) in diameter. KUHN wrappers rotate bales evenly for exact film overlap, and consistent and tightly wrapped bales. Choose from two different control systems, manual or computer-controlled, to best suit your operation. The pre-stretchers, film cutters, wrapping table and low-profile chassis design make KUHN bale wrappers simple, easy-to-use, fast and efficient. KUHN bale wrappers, designed with you in mind, provide reliable performance to ensure optimum forage quality throughout the storage period.

Features may include:

• The KUHN large square bale turntable wrappers are equipped with two pairs of steel rollers, with a ribbed profile, This design creates a deep and stable cradle for the bale, ensuring maximum bale traction, even bale rotation and proper film overlap, whatever the bale size. Two large bale support rollers provide additional stability and guidance. Round bales can also be wrapped with these wrappers.

• The standard pre-stretchers, which hold a 30” (750 mm) roll, are made of aluminum to avoid build-up of tack from the film. Both outer ends of the aluminum rollers are cone-shaped to maintain the optimum width of the film and reduce the risk of film tear. The special ribbed profile of the aluminum rollers keeps air and water away from the film. The location of the pre-stretchers makes it very easy to change the film rolls. The standard pre-stretch of 70% is reached by a low-maintenance and low-noise gear transmission.

• The KUHN SW 1614 bale wrapper features a unique low-profile design ideal for stability when loading, wrapping or unloading a bale. The rear axle position results in a low table height eliminating the need for an active fall dampener. There is constant weight on the tractor that prevents up-and-down movements of the drawbar and prevents tractor wheel slippage when driving uphill with a bale on the table or loading arm. The bale can be dropped on the go for maximum output!

• Two different control systems are available dependent on model and driver preferences:

• The manual version (M) is controlled with cable levers, and comes standard with the bale-and-wrap counter and autostop. The bale-and-wrap counter counts the film layers and total number of wrapped bales. The autostop function will automatically stop the wrapping table once the target number of film layers have been applied. This enables semi-automatic wrapping, even with manual controls.

• The computer-controlled version (C) uses a color touchscreen VT 30 to provide all the information and features of fully automatic wrapping.

• The SW 1114 computer-controlled version (C), with standard RF remote control, can be operated from a loader while using a power pack or second tractor for the oil- and power supply. This creates a one-person operation for loading, wrapping and stacking. Wrapping at the storage location means a minimum risk of damage to the film. The C version comes standard with automatic stop at the end of film roll or film tear, integrated bale and wrap counter, play/pause function and 90° loading position.